Here is a quick pic of a score I have been hoping for for a long time, but never actually achieved. I aimed at the trip 20 and missed into the trip 1 each time! Yeah! 9 points.
9 comments:
Anonymous
said...
Hello Zeeple. I am looking to machine some darts for a mechanical engineering project with the added benefit of the spinning flight, which I found you enjoy utilizing. Do you have any information regarding what type of tungsten alloy I would use to machine the dart barrel? Or, anything related to your preference in barrel size, weight, etc?
you can email me at markitos144 [at] yahoo [dot] com
Hi Mark, that sounds like a great project! I only know a little bit about the alloys used to make darts but what I know I will share with you. Tungsten is the metal of choice, obviously, but these days darts are made from either 90% Tungsten or 95% Tungsten. There are lots of different types of tungsten alloys of course but the two most common are nickel tungsten (more common) and copper tungsten (less common but better). Copper-tungsten has the property of oxidizing just a bit under the touch of human skin which improves the grip of the dart.
Barrel width is most commonly one of these: 1/4" (thinnest), 9/32", or 5/16" (thickest), and you should be able to buy tungsten rods in these sizes. Barrel length is usually 44 to 51 mm. But they are usually either long and thin or short and fat. The best darts start out thicker near the point and then narrow or taper down to a very thin barrel near the stem. Such as this one:
So I hope I was able to help, and while you are machining your darts I hope you make a set for me!! Thanks and good luck with it, Let me know if you have anymore questions.
Tommo: funny how they never follow the first dart into the trip 20 though!!! Sure, the triple 1 and triple 5 are absolute black holes pulling in every dart in the bar but the repulsion field around the high trebles remains strong. Thanks for the comment though.
kdog: sorry to hear about the stomping. That is always a bad way to end an evening. but you know you will come back in the next week or so, a good darter always does! Did you use your new Jeff Pickup darts?
jsobo: Don't worry, I am still here. I have been busy with work and things have been stacking up in my non-darting life for a while. Once I have a chance to unfurrow my brows I'll start posting more. Thanks for checking in!!!
Thanks for the "pat on the back". We did make it to the semies on the 9th. On the subject of the Jeff Pickup's, not right now, I'm still thinking of the barrel shape and all the good stuff. I'll let you know what I'm going to do.
My highest in: 142 (D11, T20, T20). This occurred on 6-11-2009 at Murphy's pub during the Spring 2009 A League semi finals. I was playing DIDO 301 against Warren. It ended up being a 10 dart game and a win.
My highest Out: 160. This occurred on 7-28-2015 against two neighbors at Coopers Ale House. I went T20, T20, D20. This was a 15 dart game.
My Lowest Game: 15 darts. This game occurred in casual play at Coopers on July 28, 2015. I was playing a three way 501 with Mac and Trevor. My scores were: 100, 100, 100, 41, 160 (out).
9 comments:
Hello Zeeple. I am looking to machine some darts for a mechanical engineering project with the added benefit of the spinning flight, which I found you enjoy utilizing. Do you have any information regarding what type of tungsten alloy I would use to machine the dart barrel? Or, anything related to your preference in barrel size, weight, etc?
you can email me at markitos144 [at] yahoo [dot] com
Thanks, happy darting!
mark
I get a few of these on the 5's, so if the first one hits T5 I tend to switch to 19's, as the others seem to follow the first one in.
I did the samething but with the 3 last night in league play, needless to said we got smoked 9-0
Where did you go? Come back Zeeple... continue your blog!
Hi Mark, that sounds like a great project! I only know a little bit
about the alloys used to make darts but what I know I will share with
you. Tungsten is the metal of choice, obviously, but these days darts
are made from either 90% Tungsten or 95% Tungsten. There are lots of
different types of tungsten alloys of course but the two most common
are nickel tungsten (more common) and copper tungsten (less common but
better). Copper-tungsten has the property of oxidizing just a bit
under the touch of human skin which improves the grip of the dart.
Barrel width is most commonly one of these: 1/4" (thinnest), 9/32", or
5/16" (thickest), and you should be able to buy tungsten rods in these
sizes. Barrel length is usually 44 to 51 mm. But they are usually
either long and thin or short and fat. The best darts start out
thicker near the point and then narrow or taper down to a very thin
barrel near the stem. Such as this one:
http://zeeple.blogspot.com/2004/07/28-gram-gts.html
So I hope I was able to help, and while you are machining your darts I
hope you make a set for me!! Thanks and good luck with it, Let me
know if you have anymore questions.
Tommo: funny how they never follow the first dart into the trip 20 though!!! Sure, the triple 1 and triple 5 are absolute black holes pulling in every dart in the bar but the repulsion field around the high trebles remains strong. Thanks for the comment though.
kdog: sorry to hear about the stomping. That is always a bad way to end an evening. but you know you will come back in the next week or so, a good darter always does! Did you use your new Jeff Pickup darts?
jsobo: Don't worry, I am still here. I have been busy with work and things have been stacking up in my non-darting life for a while. Once I have a chance to unfurrow my brows I'll start posting more. Thanks for checking in!!!
Thanks for the "pat on the back".
We did make it to the semies on the 9th. On the subject of the Jeff Pickup's, not right now, I'm still thinking of the barrel shape and all the good stuff. I'll let you know what I'm going to do.
Hey Zeeple kdog wrote the thanks for the pat comment, somehow I must of click the anonymous selction
Understood kdog. Glad you made it to the Semis and be sure to let me know wwhen you are readdy to order darts from him. I am always curious.
Post a Comment